Here are some general concepts of how the
CAT-5 Hurricane Netting system can reinforce and protect in so many ways

Take this unprotected structure. It is vulnerable to many elements of nature:

And here are some of the many ways the CAT-5 Hurricane Netting System can help:

Here's How to custom fit the net...

CLICK HERE For Complete Installation Guidelines In PDF FORMAT

Below is a simple Garage Install:

1st step: Simply measure your opening and heights

2nd Step: Open your new cat-5 system and unfold the system, measure for cutting, this system can be cut with a pair of scissors or a utility knife

Step 3: Drill holes 1 foot on center and since this gargare is concrete, this install will use a lead anchor in the walls and driveway, these will be capped off with sidewalk bolts, and painted to match the wall.

Step 4: hang the net and attach with your hardware choice bolting to the lead anchor you set in the prior step, this is called a direct mount. Then simply drill your holes in the driveway and drop in your lead anchors once more, again these will be capped with sidewalk bolts when not in use, but install will require eyebolts as this system will be laced with rope on the ground.

Step 5: The eyebolts are set 1 foot on center below the grommets, simply lace the rope in the following fashion, tying off every 2 feet.

This lace is explained in detail in our instructions, its very simple, yet very effective.

This install is complete, and the homeowner has decided to leave the net rolled under the eve for quick deployment.

When connecting multiple nets together, the net can be connected with rope or zip ties for many non-impact installations,
or with the 1/4" bolt as shown to protect against large missile impact debris HVHZ (Dade and ASTM tested and approved).

Some examples of recent installations:

Install up, over, and down if desired, to concrete or approved ground anchors...

The Net can be used in conjunction with existing storm shutters.
This application illustrates complete protection of a roof and fragile gabled end plywood
while letting your existing storm shutters protect the windows.

This installation provides holddown for roof trusses, complete protection of roof tiles,
as well as protection of the T-111 plywood covering the end truss!

Turn this...

Into this!

Complete structural protection

Once the netting system is installed once over a structure, reinstallation is easy!

Don't Forget some of the other overlooked items that can be protected: